950 Litre U.N. Approved Bunded Jet A1 EU Highway Bowser
|TOWING HEIGHT||(level) 560mm|
Constructed from 100 x 50 RSC fully welded with front standing plate and an ‘A’ frame drawbar. All hot dip galvanised.
Single Knott-Avonride 1500kg torsion beam axle and fitted with 200 x 50 Auto reverse brakes on 4 stud 51⁄2”pcd hubs
WHEELS AND TYRES:
2 No 175 x 13 x 8 ply radial tyres.
Knott-Avonride 2000kg posibrake over run auto reverse c/w spring assisted
handbrake lever, breakaway cable & 40mm ring eye or 50mm ball.
Moulded mudguards, mud flaps, rear support stand, telescopic front jockey wheel, Full road lighting c/w 13 pin plug and 7 pin adapter, side reflectors, front reflectors.
OUTER BUND TANK:
Cylindrical in section constructed from 3mm mild steel, with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable. Bund contains 110% of inner tank. 4 lifting eyes, fork truck sockets for use when tank is not fitted in a chassis.
INNER FUEL TANK:
Constructed from translucent heavy duty polyethylene with a capacity of 980 Litres. 2” filler with cap & chain. 1” manual vent valve, 1⁄2” top mounted suction & return connections. P.R.V. In the top of the tank. Ball valve in base of tank to pump.
12v Flameproof Pump. 100AH battery in box, Facet filter monitor, 7m Hose. Bonding Reel, ZVF Trigger Nozzle. Sample Hand Pump Non Resale Flowmeter.
Tank- Primer and two top coats, single British Standard colour. Galvanised Chassis.