1125 Litre 3000PSI Pressure Washer Site Bowser

£4,500.00 + VAT

The 1123 Litre Pressure Washer Site Bowser is used on building sites and is constructed from a fully welded chassis. It can be customised to the users requirements using a variety of pressure washers.

The water bowser comes complete with a 3000psi diesel electric start jet washer but can also be changed for a petrol pressure washer if required.

An optional extra of an additonal dust suppresion system can be added to the 1125 Litre Pressure Washer Site Bowser, which will sit along side the pressure washer. This comes complete with splash plate and spray bars which are operated by the Honda WX10, or the rainmaker combination.

Technical Specifications


HEIGHT: 1.37m(52 ½”)
LENGTH: 3.479m (137”)
WIDTH: 1.447m (57”)
TOWING HEIGHT: (Level) 460mm
LADEN MAX: 1460kg


Constructed from 100 x 50 RSC fully welded, with front standing plate and an ‘A’ frame drawbar, 80x80x6 RSA frame, hot dipped galvanised.


Single 45mm solid square beam axle fitted with heavy duty taper rolled bearing hub.


2 No. 175 x 13 x 8ply tyres on 4 stud 5.1/2” pcd rims.


2” solid forged ring eye.


Polyethylene moulded tank elliptical in section, baffled & fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.


T27 Adjustable Screw Leg.


Yanmar electric start L100 10HP engine driving a 200 Bar (3000 psi), 15Lpm piston pump c/w hand lance & 9m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs.


Tank moulded in yellow, blue, red or green polyethylene. Chassis galvanised.

NEED TO KNOW MORE ABOUT OUR 1125 Litre 3000PSI Pressure Washer Site Bowser?

Give us a call on +44(0)1384 564765 or drop us an email to [email protected].

    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy


    Delivery Information & Exclusions.

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?

      By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy