1125 Litre Site Dust Suppression Bowser
£2,420.40 Inc. VAT
The 1125 Litre Site Dust Suppression Bowser can be manufactured with a variety of dust control programs to ensure your workforce is protected in the workplace.
This bowser can be fitted with a gravity spray bar, rear spray bar or spreader plate and a range of pump options to meet your requirements. When fitted with a 1″ Honda pump, it will come with 15ft of water hose as standard.
Technical Specifications
DIMENSIONS (APPROXIMATE):
HEIGHT: 1.37m (52 1/2”)
LENGTH: 2.710m (106 3/4”)
WIDTH: 1.447m (57”)
TOWING HEIGHT: (Level) 430mm
UNLADEN WEIGHT: 222kg
LADEN MAX: 1400KG
CHASSIS:
The 1125 litre water site bowser chassis is constructed from 100 x 50 RSC fully welded, with front standing plate and an ‘A’ frame drawbar, 80x80x6 RSA frame, hot dipped galvanised.
AXLE:
single 45mm solid square beam axle fitted with heavy duty taper rolled bearing hub.
WHEELS AND TYRES:
2 No. 175 x 13 x 8ply tyres on 4 stud 5.1/2” pcd rims.
COUPLING:
2” solid forged ring eye.
TANK:
Elliptical in section, baffled and moulded from polytheylene, fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. Rear tap, various outlets, 2” drain.
ANCILLARY EQUIPMENT:
Front support stand.
FINISH:
Our 1125 water site bowser comes in yellow, green, red or blue polytank. Galvanised chassis.
DUST SUPPRESSION OPTIONS:
Rear spray bar, gravity fed spray bar or spreader plate.
hAVE A QUESTION, OR STILL UNSURE ON THE BEST BOWSER FOR YOUR NEEDS?
Alternatively, give us a call on +44(0)1384 564765 or drop us an email to [email protected].
Delivery Information & Exclusions.
Please refer to our Delivery and Returns policy by clicking here: https://www.trailerengineering.co.uk/delivery-returns/
However, here's some important delivery information:
* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).
*For none UK Deliveries POA.
*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.
*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.
* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.
*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.
*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.
*Tanks cannot be left without a customer’s signature.
Got a question?
Or simply need to know more about our 1125 Litre Site Dust Suppression Bowser?