1125 Litre Water EU Highway Bowser CW Extended Chassis
£2,715.00 + VAT
1125 LITRE WATER EU HIGHWAY BOWSER DESCRIPTION:
The 1125 litre towable water EU highway bowser can be configured for multiple applications, it is mostly sold to other manufactures and pressure washer suppliers where they fit their own equipment onto the EU highway bowser trailer.
The jetter plate can be altered in size to meet the customer’s equipment requirements without effecting the approvals for the highway. Other options on this EU highway bowser include dust suppression systems, pressure washers, hot wash jet washers, flower watering systems, additional brackets for customer specifications, animal feeding troughs and rear chevron boards with flashing beacons.
To find out more about our 1125 litre water EU highway bowser, get in touch with a member of our team by using the contact form below.
- HEIGHT: 1.346m (53”)
- LENGTH: 3.454m (136”)
- WIDTH: 1.55m (61”)
- TOWING HEIGHT: 420mm
- UNLADEN WEIGHT: 300kg
- LADEN MAX: 1500kg (Approximate)
The chassis used on our 1125 litre water EU highway bowser is constructed from 80 X 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½” pcd hubs.
WHEELS AND TYRES:
2 no. 185 x 13 8 ply commercial van tyres.
Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever.
Polyethylene moulded tank elliptical in section, baffled & fitted with an 18” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.
Moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, Front reflectors, rear lighting board c/w 13 pin plug and 7 pin adapter. Rear prop stand options.
Our water EU highway bowser is moulded in yellow, blue, red or green polyethylene. Chassis galvanised.
Delivery Information & Exclusions.
* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).
*For none UK Deliveries POA.
*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.
*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.
* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.
*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.
*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.
*Tanks cannot be left without a customer’s signature.