1125 Litre Water Site Bowser

£1,906.19 + VAT

A compact trailer with 1125 litre water site bowser perfect for supplying water across building sites. This water site bowser trailer can be configured for dust suppression or fitted with on-demand water pumps for feeding welfare units, there is also the option for an extended chassis for a pressure washer. Trailer Engineering offer a full bespoke service which means each product can be manufactured to meet customers requirements.

Technical Specifications


  • HEIGHT: 1.37m (52 1/2”)
  • LENGTH: 2.54m (104”)
  • WIDTH: 1.447m (57”)
  • TOWING HEIGHT: (Level) 460mm
  • LADEN MAX: 1400KG


The 1125 litre water site bowser chassis is constructed from 100 x 50 RSC fully welded, with front standing plate and an ‘A’ frame drawbar, 80x80x6 RSA frame, hot dipped galvanised.


single 45mm solid square beam axle fitted with heavy duty taper rolled bearing hub.


2 No. 175 x 13 x 8ply tyres on 4 stud 5.1/2” pcd rims.


2” solid forged ring eye.


Elliptical in section, baffled and moulded from polytheylene, fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. Rear tap, various outlets, 2” drain.


Front support stand.


Our 1125 water site bowser comes in yellow, green, red or blue polytank. Galvanised chassis.


Male hydrant connection (blue tank only).

NEED TO KNOW MORE ABOUT OUR 1125 Litre Water Site Bowser?

Give us a call on +44(0)1384 564765 or drop us an email to [email protected].

    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy

    Delivery Information & Exclusions.

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?

      By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy