120 Litre Pressure Washer Trolley Mounted – 200 Bar / 2900 PSI

£1,798.00 + VAT



The 120 Litre Mini Bowser Pressure Washer comes complete with a 120 Litre mini water bowser and a 200 Bar/2900PSI Honda pressure washer. This is fitted with an oil alert which starts via a manual recoil. It then drives a water pump with an integrated control set valve and internal bypass. This can reduce and increase pressure depending on the job being completed.

The pressure washer comes with a low-pressure chemical injector which is used for washing down with chemicals. The flow rate is 8ltr per minute. It is mounted on top of the trolley using a 20m hose reel which is fitted with 10m of 3/8″ wire braided synthetic rubber hose as standard. Other features include M22 x 3/8″ BSPM fittings, a suction hose and inline and suction filters. Other hose lengths are available on request.

The pressure washer can be used for driveways, patios, boat hulls, cleaning down equipment, and other uses.

*Despatch/collection usually Approx. 7-10 days from order.
Customer to offload forklift with extended forks will be required, to offload a curtain sided vehicle.

Technical Specifications


  • HEIGHT: 740mm
  • LENGTH: 1520mm
  • WIDTH: 680mm
  • WATER TANK CAPACITY: 120 litres
  • FUEL TANK CAPACITY: Petrol / 3.1 litres
  • WEIGHT: 58kg


Honda powered Interpump / Direct drive 3400RPM.


Powder coated steel tube frame complete with removable handles.

NEED TO KNOW MORE ABOUT OUR 120 Litre Pressure Washer Trolley Mounted – 200 Bar / 2900 PSI?

Give us a call on +44(0)1384 564765 or drop us an email to [email protected].

    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy

    Delivery Information & Exclusions.

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?

      By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy