2000 Litre 3000psi Petrol Pressure Washer Twin Axle GB Highway Bowser

Categories: , Tag:

£8,151.60 Inc. VAT

This 2000 litre petrol pressure washer bowser is fitted with a Honda GX390 3000PSI/200 BAR industrial petrol pump. It is also fitted with an interpump unit which has a 2:1 reduction gearbox for longevity and is known for its durability and quality. This has a flow rate of 15 litres per minute.

It gives plenty of cleaning time and makes mobile pressure washing easy when a water source might be difficult to access.

This pressure washer bowser can be customised to meet your requirements.

Technical Specifications

CHASSIS:

Constructed from 5mm pressed steel section fully welded with a front mounting plate and 100 x 50 RSC ‘A’ frame drawbar.

AXLE/SUSPENSION:

Twin 1500kg torsion beam axle fitted with 200 x 50 auto reverse brakes.

WHEELS AND TYRES:

4 no185 x 13 x 8 ply tyres

COUPLING:

Knott-Avonride 3000kg capacity posibrake over run auto reverse couplingc/w breakaway cable, spring assisted handbrake lever, fitted with 40mm eye or 50mm ball.

TANK:

Polyethylene moulded tank, elliptical in section, with internal anti surge baffle & fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. 2” front draw off, 2 rear outlet connections. Tank secured to chassis with 2 stainless steel straps.

FINISH:

Polyethylene tank in yellow, green, red or blue drinking water only. Chassis galvanised as standard.

PUMP:

This 3000 PSI / 200 BAR plate mounted pressure washer is powered by the robust Honda GX390 industrial petrol engine. Fitted with an interpump pump unit which are widely recognised throughout the industry for their durability and quality and a 2:1 reduction gearbox for longevity. This pump gives a water flow rate of 15 litres per minute and has been plate mounted to allow for easy transportation on truck beds, trailers, vans and other utility vehicles. Being plate mounted also allows this unit to be fitted on to a bowser washer

DIMENSIONS: (approximate)

Width: 1.840m (72”)

Laden weight: Max 3000kg

Length: 4.527m (178”)

Unladen weight: Approx 690kg

Height: 1.550m (61”)

Towing height: (level) 394mm

EXTENDED FRONT PLATE DIMENSIONS: Approx 605mm X H70, (46” x 24”)

hAVE A QUESTION, OR STILL UNSURE ON THE BEST BOWSER FOR YOUR NEEDS?



    Alternatively, give us a call on +44(0)1384 564765 or drop us an email to [email protected].

    Related products

    Delivery Information & Exclusions.

    Please refer to our Delivery and Returns policy by clicking here: https://www.trailerengineering.co.uk/delivery-returns/

    However, here's some important delivery information:

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our 2000 Litre 3000psi Petrol Pressure Washer Twin Axle GB Highway Bowser?

    +44(0)1384 564765
    [email protected]