2000 Litre Water Skid
£2,500.00 + VAT
The 2000 litre water skid base water bowser can be used for supplying water to welfare units or those in need using an on demand water pump. This would be perfect to be used in situations where areas have been affected by natural disasters and need access to water.
It has the options of being fitted with drinking water and grey water. The 2000 litre Skidbase Water Bowser would be supplied in blue polyethylene to meet requirements when filled with drinking water.
For grey water, the water bowser is available in various colour options such as yellow, red, green or other colours to meet the customers requirements.
2000 LITRE WATER SKID DIMENSIONS (APPROXIMATE):
- HEIGHT: 53” (4ft 5)
- LENGTH: 101” (8ft 5)
- WIDTH: 64” (5ft)
- UNLADEN WEIGHT: 200kg
- GROSS WEIGHT: 2200kg
Constructed from 5mm Pressed Steel section. fully welded, all fully hot dipped galvanised.
Polyethylene moulded tank elliptical in section, baffled & fitted with an 18” lockable outer hinged manlid covering inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. 1 rear tap (2 rear outlets).
Polyethene tank in choice of yellow, green, blue or red. Galvanised chassis.
Delivery Information & Exclusions.
* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).
*For none UK Deliveries POA.
*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.
*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.
* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.
*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.
*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.
*Tanks cannot be left without a customer’s signature.