Facet VF-21 SB Aviation Filter Housing

£1,101.30 + VAT

This is a genuine Facet VF-21 SB Aviation Filter Housing (ONLY) can be supplied with the aviation fuel filter cartridge to suit in the options section.

The Facet VF – 21SB when installed with a Fuel-Gard® monitor cartridge will continuously check your flow of fuel for water and solids contamination. This aviation filter will keep your fuel clean and will absorb free and emulsified water. The filter will also remove ultra-fine solids. This sturdy, single cartridge housing is easy to maintain and requires only 2″ (51 mm) base clearance for cartridge change out.

Key Features of this Facet VF-21 Filter Housing:

• Carbon steel body
• Aluminum head
• Epoxy coated internally and externally
• 150 psi (10.3 bar) design pressure
• Swing bolt quick open closure
• Buna-N o-ring closure gasket
• Vent and drain connections w/brass petcocks provided
• 1½” NPT inlet and outlet connections

The Filter cartridge to suit this Facet VF-21 SB Aviation Filter Housing is also avaliable in the options section below.


Delivery Information & Exclusions.

* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

*For none UK Deliveries POA.

*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

*Tanks cannot be left without a customer’s signature.

Got a question?

Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?

    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy