Dust Suppression Water Spreader Plate

Category:

SPREADER PLATE DESCRIPTION:

Our Spreader Plate is available to be fitted to any Site or Highway Tow Water Bowser in the Range

Dust suppression is very important when operating on a demolition / construction site for health and safety. If your site does not have the sufficient dust suppression health and safety inspectors will shut down the site until the matter is dealt with. The most efficient and effective way to deal with dust is to use a water bowser fitted with the appropriate equipment for dust suppression. Trailer Engineering offer a full range of dust suppression products including water bowsers fitted with splash plates as you will find below.

Description

OPTION 1:

2” Honda Hand Start Petrol Pump Plumbed into Bowser & fitted with Rear Deflector Plate. Gives an Arc of Water Approximately 34ft Wide (10.36m), 25ft Deep (7.62m) At approximately 600 lpm.

OPTION 2:

1” Honda Hand Start Petrol Pump Plumbed into Bowser & fitted with Rear Deflector Plate. Gives an Arc of Water Approximately 16ft Wide (4.8m), 13ft Deep (3.96m) At approximately 100 lpm

hAVE A QUESTION, OR STILL UNSURE ON THE BEST BOWSER FOR YOUR NEEDS?



    Alternatively, give us a call on +44(0)1384 564765 or drop us an email to [email protected].

    Delivery Information & Exclusions.

    Please refer to our Delivery and Returns policy by clicking here: https://www.trailerengineering.co.uk/delivery-returns/

    However, here's some important delivery information:

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our Dust Suppression Water Spreader Plate?