TJ15 Heavy Duty Serrated Jockey Wheel

£69.00 + VAT

TJ15 Serrated Jockey Wheel (Telescopic 48mm) Part Code: J348S/1

This is a genuine Knott-Avonride 3500kg industrial anti vibration Heavy Duty Trailer 48mm Jockey Wheel.

This jockey wheel has a maximum 200kg static nose load and a maximum capacity of 3500kg. Wheel diameter is 230mm  and manufactured from steel wheel with a rubber tyre. The jockey wheel shaft is ribbed and has a diameter of 48mm

This Knott-Avonride trailer/caravan jockey wheel IS NOT supplied with a clamp.

Suitable for Trailer Engineering’s 1125 and 2000 litre pressure washer bowser trailers, vacuum tank trailers, generator trailers, flatbed trailers as well as the 2140  litre fuel bowser trailer. Will fit straight into Knott-Avonride couplings and will require clamp and handle (NOT supplied with jockey wheel), or can be fitted onto a trailer via a clamp suitable for the jockey wheel. Can fit into other trailer coupling brands such as Ifor Williams, Indespension trailers, Brian James trailers and Bradley couplings to name a few. This jockey wheel can also be fitted to some caravans.

Delivery Information & Exclusions.

* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

*For none UK Deliveries POA.

*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

*Tanks cannot be left without a customer’s signature.

Got a question?

Or simply need to know more about our TJ15 Heavy Duty Serrated Jockey Wheel?