Unitel Hydrostatic Gauge

Category:

£116.60 + VAT

The Unitel Hydrostatic Gauge can be used on fuel oil, diesel and adblue tanks to indicate the levels of fuel. The gauge is pneumatic and is designed with a spring loaded plunger that is to be pulled and released into order for the needle to settle on the fuel contents and take a measurement. The measurements on the Unitel Hydrostatic Gauge are in percentage and it can be used for horizontal, vertical and cylindrical tanks with heights ranging from 1200mm to 3000mm for diesel. For water and adblue it can measure tanks up to 2500mm.

The Unitel Hydrostatic Gauge is fitted with a second needle in which can be adjusted to a level to indicate when the tank will need more fuel.  Features of the gauge included an accuracy of +/-3% at full scale and it is supplied with 20metres of PVC capillary. The gauge is suitable for diesel, kerosene, biodiesel up to B100, water and urea.

Delivery Information & Exclusions.

* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

*For none UK Deliveries POA.

*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

*Tanks cannot be left without a customer’s signature.

Got a question?

Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?







    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy