Yanmar Diesel 2″ Pacer Series Electric Start Pump


£1,870.00 + VAT

The Yanmar Diesel 2″ Pacer Series Electric Start Pump has a 2.5 bar maximum pressure and is self-priming. It is constructed from a polyester body with EDPM seal, carbon ceramic mechanical seal and a polyester 706 impeller.

The Yanmar Diesel engine is electric start with a 2″ Pacer Series water Pump it has a high flow and can move 757 litres per minute.



  • 4 Bar max pressure
  • 757 Lpm max flow
  • Self-priming (after initial priming)
  • Yanmar L48V diesel engine
  • Electric start with switch
  • Polyester body, EPDM seals
  • 2″ female pump inlet
  • 2″ female pump outlet
  • Carbon ceramic mechanical seal
  • Polyester 706 impeller
  • Battery/leads NOT supplied

NEED TO KNOW MORE ABOUT OUR Yanmar Diesel 2″ Pacer Series Electric Start Pump?

Give us a call on +44(0)1384 564765 or drop us an email to [email protected].

    Delivery Information & Exclusions.

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our Yanmar Diesel 2″ Pacer Series Electric Start Pump?