1125 Litre 3000 Psi Pressure Washer Highway Bowser C/W Rainmaker Combo
|TOWING HEIGHT||(level) 420mm|
Constructed from 80 X 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5½” pcd hubs
WHEELS AND TYRES:
2 no. 175 x 13 8 ply commercial van tyres.
Knott-Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever.
Polyethylene moulded tank elliptical in section, baffled & fitted with an 18”lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.
Yanmar electric start L100 10HP engine driving a 200 Bar (3000 psi), 15Lpm piston pump c/w hand lance & 7m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs
Moulded mudguards, front telescopic jockey wheel, side reflectors, front reflectors, rear lighting board c/w 13 pin plug and 7 pin adapter.
Tank moulded in yellow, blue, red or green polyethene. Chassis galvanised.
Diverter valve to switch from lance to spray nozzle, three powerful jet nozzles powered by the pressure washer covering a wide range area, adjustable height. Height 1200mm extends to 2000mm, also adjustable nozzle for different angles. Application: - damping down roads while being towed at slow speed or stationary building demolition work.