1125 Litre 3000psi Pressure Washer EU Highway Bowser
Trailer Engineering offer a full range of pressure washers. The standard Pressure washer they offer is the 3000 psi diesel Yanmar pressure washer as it is the favourite amongst the Planthire and Construction industries. Fitted onto a robust highway towable trailer, complete with a polyethylene water tank. This water bowser and pressure washer is also available on site tow able trailers and static skid base bowsers. As manufacturers Trailer Engineering offer a complete customizable product to meet every customers requirement.
|TOWING HEIGHT||(Level) 420mm|
Constructed from 80 X 80 RSA. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.
Knott-Avonride 1500kg rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 stud 5 1⁄2” pcd hubs
WHEELS AND TYRES:
2 no. 175 x 13 x 8 ply tyres.
Knott-Avonride 2000kg auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and spring assisted hand brake lever.
Polyethylene moulded tank elliptical in section, baffled & fitted with a 22”lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps.1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.
Yanmar electric start L100 10HP engine driving a 200 Bar (3000 psi), 15Lpm piston pump c/w hand lance & 9m of hose stowed on bracket. Fuel consumption approx 1.5L/Hr, running time approx 2.9Hrs
Moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, Front reflectors, rear lighting board c/w 13 pin plug and 7 pin adapter.
Tank moulded in yellow, blue, red or green polyethylene. Chassis galvanised.
RAINMAKER OPTIONAL EXTRA:
Trailer Engineering also offer the Rainmaker / Pressure washer combination which is a NEW and innovative product to the dust suppression industry, offering a budget alternative to the very expensive dust cannon and dust fan machines. This is a customised version of the standard 3000 psi diesel pressure washer water bowser and comes with the Rainmaker fitted onto the pressure washer for a controlled suppression of dust, perfect for building and demolition sites. This multi functional water bowser only uses 15LPM at any time. If you already have a pressure washer and would like to convert it, Trailer Engineering also offer a retro fitting kit for the Rainmaker which comes with the Rainmaker mast and spray nozzles, two way high pressure valve, high pressure hose and connections. Trailer Engineering's Rainmaker can be fitted to any 3000 psi pressure washer with this kit. See the Rainmaker in action in the videos below.
have a question? get in touch: