2000 Litre 3000psi Pressure Washer EU Highway Bowser
Some customers require to use a pressure washer for longer periods of time or operate in remote locations in which means there is need for a larger water tank to supply the additional water that is required. So with the demand for a pressure washer with a larger water bowser Trailer Engineering have extended their standard 2000 litre water bowser for a 3000 psi pressure washer to be fitted. There are options for other pressure washers. This trailer is fully approved for towing on the public highway aswell as being highly capable offroad with plenty of ground clearance.
|TOWING HEIGHT||(level) 480mm|
Constructed from 5mm pressed steel section fully welded with a front mounting plate and 100 x 50 RSC ‘A’ frame drawbar.
Single Knott-Avonride 3000kg torsion beam axle fitted with 300 x 60 auto reverse brakes.
WHEELS AND TYRES:
2 no. 235 /85 x 16 x 12 ply radial tyres on 5 stud 6½” pcd rims.
Knott-Avonride 3000kg capacity posibrake over run auto reverse coupling c/w breakaway cable, spring assisted handbrake lever, fitted with 40mm eye or 50mm ball.
Polyethylene moulded tank, elliptical in section, with internal anti surge baffle & fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. 2” front draw off, 2 rear outlet connections. Tank secured to chassis with 2 stainless steel straps.
Yanmar electric start L100 10HP engine driving a 200 Bar (3000 psi). 15Lpm piston pump c/w hand lance & 9m of hose stowed on bracket. Fuel consumption approx. 1.5L/Hr, running time approx. 2.9Hrs
moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, & front markers, full road lighting c/w 13 pin plug and 7 pin adapter.
Polyethylene tank in yellow, green, red or blue. Drinking water blue only. Chassis galvanised as standard.