985 Litre Drinking Water Cube
This unique and innovative drinking water cube is based on Trailer Engineering's fuelcube range meaning it can be stacked on top of the standard Polycube. This drinking water cube in particular is heated by trace wire heating throughout the tank, the pipe work is fully insulated and there is also insulation between the inner and outer tanks to prevent freeze ups during cold weather. Even if the outside temperatures drop below -20°C the water will maintain a +5°C when the heating is on for a duration of time. T
here are pumping options with this product including on demand 110v or 240v water pumps all secured in a lockable cabinet. The galvanised steel frame has four lifting points and four fork truck sockets. For drinking water (potable water) the water tank will need to be constructed from a specialist blue polyethylene which is secretary of state approved for drinking water, other colours are available for grey water (waste water).
Drinking Water Cube Dimensions (approximate):
|HEIGHT:||1430mm overall (exc.cabinet)|
This drinking water cube comes with a corrosion free, robust Polyethylene tank.
Our 985 litre drinking water cube comes with a corrosion free, robust Polyethylene inner tank, 20mm insulation fitted to the tank walls, 25mm under floor insulation c/w Base Heating system. 2” filler cap. Contents gauge. Pump Suction Pipe and vented 180mm inspection lid.
Galvanised 5mm reinforced steel frame with 5mm protective bottom base plate c/w built in fork sockets on four sides. Four corner lifting eyes. Gas strut assisted secure lockable steel access lid.
Approved to stack 2 high when full and 3 high when empty.
110v or 240v On Demand Pump c/w trace heating wire to prevent freezing. All hoses are trace wire heated and insulated to prevent freezing c/w thermostatically controlled unit. All mounted in a bolt-on galvanised lockable cabinet.
Blue Polyethylene Drinking Water cube approved, as standard. Other colours available. Galvanised frame and lid.