2000 Litre Water EU Highway Bowser
This standard 2000 litre water EU bowser is fully approved for towing on the road and has unrivalled off road capabilities. It is a very important trailer within the construction industry as not only can it be used to transport water but it can also be used for dust control on building sites. There are many dust suppression products available for this trailer including spray bars, splash plates and the new pressure washer / rainmaker combo. This trailer can be extended for pressure washers. There are also options to convert this water bowser into a flower watering bowser or animal feeding water bowser.
2000 Litre Water EU Highway Bowser Dimensions (approximate):
|TOWING HEIGHT||(level) 480mm|
|UNLADEN WEIGHT:||515kg approx|
Constructed from 5mm pressed steel section fully welded with a front standing plate and 100 x 50 RSC ‘A’ frame drawbar.
Single Knott-Avonride 3000kg torsion beam axle fitted with 300 x 60 auto reverse brakes.
WHEELS AND TYRES:
2 no. 235 /85 x 16 x 12 ply radial tyres on 5 stud 61/2” pcd rims.
Knott-Avonride 3000kg capacity posibrake over run auto reverse coupling c/w breakaway cable, spring assisted handbrake lever, fitted with 40mm eye or 50mm ball.
Trailer Engineering's 2000 litre water EU highway bowser uses a polyethylene moulded tank, elliptical in section, with internal anti surge baffle & fitted with a 22” lockable outer hinged manlid cover, inner sealed vented manlid. 2” front draw off, 2 rear outlet connections.Tank secured to chassis with 2 stainless steel straps.
Our 2000 litre water EU highway bowser comes with moulded mudguards, mud flaps,front telescopic jockey wheel, Side reflectors, & front markers, full road lighting c/w 13 pin plug and 7 pin adapter.
Optional on request
Polyethylene tank in yellow, green, red or blue drinking water only. Chassis galvanised as standard.