985 Litre Water Storage Cube

£1,270.00 + VAT

The 985 litre waste water cube is a water storage cube that can be configured for waste water, drinking water and grey water. This water storage cube is economically friendly on transport. The frame work around this water cube has 4 lifting points and 2 fork lift truck points. It is manufactured to fir 44 cubes on one flatbed lorry.

The 985 Litre Waste Water Cube is available to hold waste water or drinking water. The grey water cube can be constructed from a variety of polyethylene colour options.

The option for drinking water which will need to be constructed from a specialist blue polyethylene that will be secretary of state approved.

Technical Specifications

WATER CUBE DIMENSIONS (APPROXIMATE):

  • HEIGHT: 1430mm overall
  • LENGTH: 1213mm
  • WIDTH: 1213mm
  • UNLADEN WEIGHT: 300kg
  • LADEN WEIGHT: 1300KG

TANK:

Trailer Engineering’s 985 litre waste water cubes are designed and manufactured using a corrosion free, robust Polyethylene tank with a vented lockable180mm inspection lid. 2” Bottom drain and top connections.

FRAME:

Our wate water cubes utilise a Galvanised 5mm reinforced steel frame with built in fork sockets on four sides. Four corner lifting eyes.

STORAGE:

Approved to stack 2 high when full and 3 high when empty.

FINISH:

At Trailer Engineering, our 985 litre wate water cubes use a Green Polyethylene Water tank, as standard. Other colours are available. Galvanised frame.

NEED TO KNOW MORE ABOUT OUR 985 Litre Water Storage Cube?

Give us a call on +44(0)1384 564765 or drop us an email to [email protected].







    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy

    Delivery Information & Exclusions.

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?







      By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy