Twin Axle Highway Towable Water Bowser Trailer
£2,793.00 + VAT
The Twin Axle Trailer For 2000 Litre Water Bowser Trailer is suitable for Trailer Engineering’s 2000 Litre Water Bowser and has a twin axle. It is constructed from 100 x 50 RSC and has a fully welded ‘A’ frame drawbar with a front standing plate. The frame also has a 5mm pressed steel section.
The Twin Axle Trailer For 2000 Litre Water Bowser Trailer comes with moulded tandem mud guards,a heavy duty jockey wheel and front markers. It also has side reflectors and a rear lighting board for safety when on the roads.
Description
DIMENSIONS:
- LENGTH: 3.320m (139”)
- WIDTH: 1.830m (70 1⁄2”)
- TOWING HEIGHT: (Level) 350mm
- LADEN WEIGHT: 3000kg
- VARIATIONS IN TOWING HEIGHTS: -25mm + 100mm
CHASSIS:
Constructed from 5mm pressed steel section fully welded with a 100 x 50 RSC ‘A’ frame drawbar and front standing plate.
AXLE:
Twin Knott-Avonride 1500kg torsion beam axles fitted with 200 x 50 Auto reverse brakes.
WHEELS AND TYRES:
4 No. 185 /13 x 8 Ply tyres on 4 stud rims.
COUPLING:
Knott-Avonride 3000kg auto reverse coupling fitted with either a choice of 40mm eye or 50mm ball, break away cable and spring assisted hand brake lever.
ANCILLARY EQUIPMENT:
Moulded tandem mudguards, heavy duty jockey wheel, c/w side reflectors, front markers, rear lighting board c/w 13 pin plug.
FINISH:
Galvanised chassis as standard.
NEED TO KNOW MORE ABOUT OUR Twin Axle Highway Towable Water Bowser Trailer?
Give us a call on +44(0)1384 564765 or drop us an email to [email protected].
Delivery Information & Exclusions.
* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).
*For none UK Deliveries POA.
*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.
*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.
* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.
*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.
*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.
*Tanks cannot be left without a customer’s signature.
Got a question?
Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?