1125 Litre Animal Feeder Highway Bowser
£3,500.00 + VAT
The Trailer Engineering 1125 litre animal feeder highway bowser is perfect for wildlife trusts and the farming industry, this 1125 litre water bowser has the capability to go on and off road making it easy to reach heard’s of animals in remote locations.
Fully approved for towing on the public highway and constructed from a strong fully welded chassis fitted onto a T-frame and supplied with a robust 1125 litre polyethylene water bowser. Large and medium troughs are available with automatic refill for our 1125 litre animal feeder highway bowser.
Animals such as cows, sheep, deer and horses drink comfortably from this product. This 1125 litre animal feeder Hhighway bowser can also be fitted onto the larger 2000 litre water bowser chassis for more ground clearance if needed. Chassis available for highway tow or site tow and 2000 litre tanks can also be supplied.
Technical Specifications
1125 LITRE ANIMAL FEEDER HIGHWAY BOWSER DIMENSIONS (APPROXIMATE):
- HEIGHT: 1.346m (53”)
- LENGTH: 3.454m (136”)
- WIDTH: 1.55m (61”)
- TOWING HEIGHT: (level) 420mm
- UNLADEN WEIGHT: 300kg
- LADEN MAX: 1500kg
CHASSIS:
Our 1125 litre animal feeder highway bowser is constructed from 80 X 80 R.S.A. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised.
AXLE/SUSPENSION:
Avonride rubber torsion beam axle fitted with 200 x 50 auto reverse brakes. 4 Stud 5 1/2″ pcd hubs.
WHEELS AND TYRES:
2 no. 185 x 13 8 ply commercial van tyres.
COUPLING:
Knott-Avonride auto reverse coupling fitted with 40mm eye or 50mm ball, break away cable and parking brake lever.
TANK:
Polyethylene moulded tank elliptical in section, baffled & fitted with an 18” lockable outer hinged manlid cover, inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. 1 rear tap fitted, 2” bottom drain underneath rear of tank. 2 rear outlets.
ANCILLARY EQUIPMENT:
Our animal feeder highway bowser comes with a range of ancillary equipment including, moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, rear lighting board c/w 13 pin plug. Atlas Plastics 30 Gallon Double Water Trough. Tough Strong and a leading industry product fitted with B.S Ball valve. Float protect by plastic cover.
- Animal Trough:
- Dimensions: (“) 47 x 19 x 11 (mm) 1193 x 482 x 280
- Capacity: – 136 Litres/ 30 Gal.
INNER FUEL TANK:
The bunded diesel EU highway bowser inner fuel tank is constructed from translucent heavy duty polyethylene with a capacity of 980 Litres. 2” filler with cap & chain. 1” manual vent valve. Pressure relief valve in the top of the tank. Ball valve in base of tank to pump.
FINISH:
Tank moulded in yellow, blue, red or green polyethylene. Chassis galvanised.
NEED TO KNOW MORE ABOUT OUR 1125 Litre Animal Feeder Highway Bowser?
Give us a call on +44(0)1384 564765 or drop us an email to [email protected].
Related products
Delivery Information & Exclusions.
* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).
*For none UK Deliveries POA.
*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.
*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.
* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.
*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.
*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.
*Tanks cannot be left without a customer’s signature.
Got a question?
Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?