985 Litre Drinking Water Cube

This unique and innovative drinking water cube is based on Trailer Engineering’s fuelcube range meaning it can be stacked on top of the standard polycube. This drinking water cube in particular is heated by trace wire heating throughout the tank, the pipe work is fully insulated and there is also insulation between the inner and outer tanks to prevent freeze ups during cold weather. Even if the outside temperatures drop below -20°C the water will maintain a +5°C when the heating is on for a duration of time. T

here are pumping options with this product including on demand 110v or 240v water pumps all secured in a lockable cabinet. The galvanised steel frame has four lifting points and four fork truck sockets. For drinking water (potable water) the water tank will need to be constructed from a specialist blue polyethylene which is secretary of state approved for drinking water, other colours are available for grey water (waste water).

Technical Specifications

DRINKING WATER CUBE DIMENSIONS (APPROXIMATE):

  • HEIGHT: 1430mm overall (exc.cabinet)
  • LENGTH: 1213mm (exc.cabinet)
  • WIDTH: 1213mm (exc.cabinet)
  • UNLADEN WEIGHT: 330kg
  • LADEN WEIGHT: 1315kg
  • CABINET WIDTH: 300mm
  • CABINET LENGTH: 910mm
  • CABINET HEIGHT: 450mm

OUTER TANK:

This drinking water cube comes with a corrosion free, robust Polyethylene tank.

INNER TANK:

Our 985 litre drinking water cube comes with a corrosion free, robust Polyethylene inner tank, 20mm insulation fitted to the tank walls, 25mm under floor insulation c/w Base Heating system. 2” filler cap. Contents gauge. Pump Suction Pipe and vented 180mm inspection lid.

FRAME:

Galvanised 5mm reinforced steel frame with 5mm protective bottom base plate c/w built in fork sockets on four sides. Four corner lifting eyes. Gas strut assisted secure lockable steel access lid.

STORAGE:

Approved to stack 2 high when full and 3 high when empty.

OPTIONAL PUMPS:

110v or 240v On Demand Pump c/w trace heating wire to prevent freezing. All hoses are trace wire heated and insulated to prevent freezing c/w thermostatically controlled unit. All mounted in a bolt-on galvanised lockable cabinet.

FINISH:

Blue Polyethylene Drinking Water cube approved, as standard. Other colours available. Galvanised frame and lid.

NEED TO KNOW MORE ABOUT OUR 985 Litre Drinking Water Cube?

Give us a call on +44(0)1384 564765 or drop us an email to [email protected].







    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy

    Delivery Information & Exclusions.

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?







      By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy