1125 Litre Flower Watering Water Bowser (E.U Highway)

£3,845.00 + VAT

The 1125 Litre Flower Watering E.U Highway Bowser can be used for maintaining landscape in cities, towns and private estates. It is fully approved for towing on the road and thanks to its design, the water bowser can go off-road across landscapes and a variety of terrains.

The 1125 Litre Flower Watering E.U Highway water Bowser has the options to be customised to meet the users requirements. It has optional extra’s such as being fitted with a rear chevron board with flashing beacons and can also be configured with a 2000 litre water bowser tank. This ensures safe operation when working road side and watering flowers around busy areas. The Flower water bowser comes complete with 1” water pump, 50ft of ½ hose on reel c/w flower watering gun included.

To find out more about the 2000 litre Flower Watering Water Bowser please click here. 

Technical Specifications

1125 LITRE FLOWER WATERING EU HIGHWAY BOWSER DIMENSIONS (APPROXIMATE):

  • HEIGHT: 1.346m (53″)
  • LENGTH: 3.454m (136”)
  • WIDTH: 1.5m (61”)
  • TOWING HEIGHT: (Level) 420mm
  • UNLADEN WEIGHT: 375kg approx
  • LADEN MAX: 1500kg

CHASSIS:

Our 1125 Litre Flower Watering EU Highway Bowser is chassis is constructed from 80 x 80 RSA. fully welded with a ‘T’ frame drawbar, all fully hot dipped galvanised. 5mm sheet front mounting plate.

AXLE/SUSPENSION:

The 1125 Litre Flower Watering EU Highway Bowser comes with a knott-Avonride 1500kg rubber torsion beam axle fitted with 200 x 50 auto reverse brakes on 4 stud 5 1⁄2“ pcd hubs.

WHEELS AND TYRES:

2 no. 185 x 13 x 8 ply tyres on 4 Stud 5 1⁄2” pcd Rims.

COUPLING:

Knott-Avonride 2000kg auto reverse coupling fitted with 40mm eye or 50mm Ball, break away cable and spring assisted hand brake lever.

ANCILLARY EQUIPMENT:

The 1125 Litre Flower Watering EU Highway Bowser has a polyethylene moulded tank elliptical in section, baffled & fitted with a 22” lockable outer hinged manlid covering inner sealed vented manlid. Tank secured to chassis with 2 stainless steel straps. 1 rear tap (2 rear outlets).

PUMP:

1” Honda petrol engine driven pump c/w 50ft of 1⁄2” hose on a hand rewind hose reel, c/w spray nozzle.

ANCILLARY EQUIPMENT:

Moulded mudguards, mud flaps, front telescopic jockey wheel, Side reflectors, Front reflectors, rear lighting board c/w 13 pin plug and 7 pin adapter.

OPTIONAL EXTRA:

Rear chevron board with directional arrow & flashing beacons. Alternative pumps & hose reels on request

FINISH:

Trailer Engineering’s 1125 Litre Flower Watering EU Highway Bowser’s Polyethylene tank is available in a choice of yellow, green, blue or red. Galvanised Chassis.

NEED TO KNOW MORE ABOUT OUR 1125 Litre Flower Watering Water Bowser (E.U Highway)?

Give us a call on +44(0)1384 564765 or drop us an email to [email protected].







    By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy

    footer-brand

    Delivery Information & Exclusions.

    * UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).

    *For none UK Deliveries POA.

    *Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.

    *Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.

    * It is the customers responsibility to ensure that there is safe and adequate access for large lorries.

    *Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.

    *As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.

    *Tanks cannot be left without a customer’s signature.

    Got a question?

    Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?







      By clicking the send button below you are agreeing to Trailer Engineering Limited's Privacy Policy