1125 Litre Site Water Bowser With Small Animal Trough
£2,843.53 + VAT
This 1125 Litre Animal Feeder Water Bowser is a site tow bowser in which can only be towed around a site and not on public roads. It can be towed at speeds of up to 30mph maximum.
This bowser does not require a pump due to the trough being self-filling from the main tank. This makes it is easy to use and requires minmal maintenance.
The 1125 litre animal feeder is suitable for use in fields and paddocks where there is not access to main water connections and the animals are away from their main feeding area. It saftely stores the water and allows the animals to feed from the small trough attached. The bowser should be stored in shaded areas to prevent the water from becoming warm.
The chassis is constructed from 80 x 80 x 6mm R.S.A fully welded with a front standing plate and an ‘A’ frame drawbar. All are fully hot dipped galvanised to BS Standards.
ANIMAL FEEDER WATER BOWSER DIMENSIONS (APPROXIMATE):
- WIDTH: 1.447m
- HEIGHT: 1.33m
- LENGTH: 2.64m
- UNLADEN WEIGHT: 320kg
- LADEN WEIGHT: 1400kg
Single 45mm solid square beam axle fitted with heavy duty taper roller bearing hubs
WHEELS AND TYRES:
Fitted with two 175 x 13 8 ply commercial van tyres on 4 stud 5 ½” PCD rims.
2″ solid forged ring eye or 50mm ball hitch.
Front support stand.
- Elliptic shape.
- Constructed from high density Polyethylene and fitted with an 18″ vented manlid with an outer manlid cover.
- The tank is baffled and is fitted with a rear tap and various outlets.
- The tank is attached to the trailer using 2x stainless steel straps.
Available in red, yellow, green and blue (for drinking water). Other colours are available on request.
Delivery Information & Exclusions.
* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).
*For none UK Deliveries POA.
*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.
*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.
* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.
*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.
*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.
*Tanks cannot be left without a customer’s signature.