2400L Twin Axle Vacuum Tanker With 3000psi Pressure Washer
£17,500.00 + VAT
The 2400L Vacuum Tanker is a galvanised steel tank fitted with a Honda Petrol GX270 driving a MEC 2000 vacuum pump with 60m of tiger tail suction hose. It also has a Honda 3000psi powered pressure washer with its own water supply of a 200 litre water tank and 30m of pressure washer hose on a reel.
This tank can be customised to suit your requirements.
The lead time to supply this tank is approximately 10-12 weeks.
Technical Specifications
Tank:
Constructed from 5mm mild steel galvanised complete with dished ends painted to a single RAL or BS colour
18″ bolt on access man lid in top of the tank, contents sight glass, 3″ inlet c/w URT connector c/w valve and 60m tiger tail hose stored on brackets around tank c/w cam lock quick release connectors per 15m, 3″ outlet in bottom of tank for emptying c/w URT connector and valve.
Safety features:
Pressure relief valve, vacuum relief valve, pressure gauge, primary overfill protection. Secondary over fill protection.
Equipment:
Honda Petrol electric start engine powering a MEC 2000 vacuum pump via twin belts c/w guard.
Pump can vacuum the tank to fill via 3″ inlet and pressurise the tank to empty via the 3″ discharge valve in the base of the tank.
Honda powered pressure washer c/w 30m hose on reel.
200 litre square water tank.
Chassis:
Tank mounted on a twin axle highway tow chassis galvanised gorss 3500kg.
Please note filling to the max tank capacity will push the trailer slightly over weight.
NEED TO KNOW MORE ABOUT OUR 2400L Twin Axle Vacuum Tanker With 3000psi Pressure Washer?
Give us a call on +44(0)1384 564765 or drop us an email to [email protected].
Delivery Information & Exclusions.
* UK Mainland Delivery, Delivery price above Excludes Northern Ireland, Northern Scotland & Isles, West Wales, coastal areas Etc Price On Application (POA).
*For none UK Deliveries POA.
*Offloading of heavy items such as bowsers & tanks should be made by a forklift with extended forks or similar heavy lifting equipment. If you will be offloading via an overhead crane and require delivery to be made on flat bed vehicle please advise prior to purchase as additional charges may apply, our standard delivery vehicles are normally curtain sided vehicles and don’t allow access for overhead cranes. If a forklift with extended forks is not available to offload, please advise prior to purchase as we can make alternative arrangements i.e. Via HIAB Delivery. However, these special deliveries will be POA.
*Delivery is a kerbside service only, and not a “drop at your door service”. Arrangements must be made by the customer to manoeuvre the tanks into position.
* It is the customers responsibility to ensure that there is safe and adequate access for large lorries.
*Trailer Engineering Will contact you prior to despatch to advise delivery date, if for any reason delivery is attempted and failed on the advised date, it is the customers responsibility to cover the initial transport costs and any additional charges to get the units back to ourselves and Re-delivered on another date. Therefore, it is vital that if delivery is expected on a specific date that someone is available with the correct offloading facilities and can sign for the goods at the delivery address as additional charges for failed deliveries can be significant.
*As offloading is the customers responsibility any damages to the units which is caused during the offloading process wouldn’t be covered under warranty and would be the customers responsibility.
*Tanks cannot be left without a customer’s signature.
Got a question?
Or simply need to know more about our 950 litre U.N. approved bunded diesel road tow fuel bowser?